CPE-A311
Precautions:
- Place the CPE in a horizontal position to avoid damage from shaking orfalling.
- The ideal working temperature of equipment is 0 °C ~ 40 °C, the ideal storage temperature is -20 °C~ +70 °C,
Avoid too high or too low temperature to prevent the equipment or accessories from damages.
- Avoid the unnecessary damage of equipment or accessories from the fire, water and other high temperature or erosion position.
- Avoid using the equipment during a lighting storm to prevent the equipment from lightning strikes.
- Avoid violence press or bend the external antenna, otherwise it may affect the quality of communication.
|
S/N |
Icon |
Functions |
|
1 |
0 |
On: CPE connected with power supply, the light is on under power-on status. Off: CPE disconnected with power supply, the indicator light is off. |
|
2 |
:零 |
On: After CPE starts up, the indicator light is on if SIM card is inserted . It will blink after registering on the network and dialing successfully. Off: CPE disconnected with power supply or the SIM card is removed, the indicator light is off. |
|
3 |
|
On: After CPE starts up, display the number of signal bars according to the actual network conditions. Off: CPE disconnected with power supply, the indicator light is off. |
|
4 |
画 |
On: CPE starts up, after detected the SIM card, the indicator light is on. Off: CPE disconnected with power supply or no SIM card is inserted, the indicator light is off. |
|
5 |
容 |
On: WIFI indicator light is normally on after the CPE powers on, It blinks when terminal connected with WIFI. Off: CPE disconnected with power supply, the indicator light will be off. |
|
6 |
困 |
On: After CPE starts up, the indicator light is on when there is unread SMS. It blinks when receiving new SMS, if SMS is not read, it will turn to constant light. When SMS storage is full, it will blink continuously. Off: CPE disconnected with power supply or no unread SMS, the indicator light is off. |
|
7 |
|
On: ETH1 port accesses with network cable, the indicator light blinks when working. Off: Plug out network cable from ETH1 port, the indicator light if off. |
|
8 |
|
On: Working under 4G network, the indicator light is on. Off: CPE power disconnected or CPE is networking under 4G network. |
|
9 |
Power supply |
Power supply requirements: 12V, 1A. Please us |
|
10 |
Reset key |
Long press reset key for 5 seconds then release, CPE will do factory reset and the device will restart automatically. |
|
11 |
Power key |
Press the power key to power on or power off the CPE. |
|
12 |
USB |
Upgrade software. |
|
13 |
SIM card slot |
Insert SIM card, it is used for connecting with network. Support standard SIM card. |
|
14 |
LAN interface |
To provide wired data transmission for the LAN port terminal. It is used for connecting a computer or other local area network equipment. |
|
15 |
TEL |
Dial up phone. |